HomeProductsGate ValvesPressure Seal Gate ValvePressure Seal Bonnet Gate Valve

Pressure Seal Bonnet Gate Valve

Describes the design and product range:
Design basis: ASME B16.34, GB12234, API600
Flanged ends: ASME B16.5, GB9113
Butt-welding ends: ASME B16.25
Face-to-face dimension: ASME B16.10, GB12221
Inspection and test: API598, API6D, JB/T9092
Pressure rating: Class150~2500, PN16~PN420
Product range: 1/2″~16″, DN15~DN400
Materials of main parts: WCB, LCB, WC6, WC9, C5, C

Pressure Seal Bonnet Gate Valve:

The gate valve can only be fully opened and fully closed to be used for cutting in the pipeline. It has such features as unlimited installation direction, small disturbed current, low pressure drop, shorter face-to-face dimension, good sealing performance and wide application range. The most important feature of the steel gate valve of TSV Group is that it can be ensured that the permissible leakage rate can be lower than that specified in API6D and API600, and the middle shaft sealing can pass the USA VOC leakage test. TSV Group can provide trims of various materials including materials specified by API600. We can also provide valves of various casting materials, such as carbon steel, stainless steel, alloy, Hastelloy, nickel chrome and etc.

Design features:

Certified to API600
USA VOC middle shaft micro leakage certification
Design of outside screw and yoke
Bolted bonnet
Pressure self-sealing type bonnet
Design of wedge type flexible gate and full guide rail
Operation methods: handwheel, bevel gear or electric operation
Overlay welding by hard alloy can be performed on the seat surface according to specifications in API600
Replaceable valve seat and back seat
Integral seat and back seat are adopted in stainless steel valves

Design features:

Certified to API600
USA VOC middle shaft micro leakage certification
Design of outside screw and yoke
Bolted bonnet
Pressure self-sealing type bonnet
Design of wedge type flexible gate and full guide rail
Operation methods: handwheel, bevel gear or electric operation
Overlay welding by hard alloy can be performed on the seat surface according to specifications in API600
Replaceable valve seat and back seat
Integral seat and back seat are adopted in stainless steel valves

  

If you have any enquiry about quotation or cooperation,please feel free to email us at or use the following enquiry form. Our sales will contact you within 24 hours. Thank you for your interest in our products.

We value your privacy

We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking "Accept All", you consent to our use of cookies.

Consent Preferences

Consent Preferences