Metal To Metal Seat Ball Valve

Design basis:ASMEB16.34/ API608/DIN3357 、EN12516GB/T1224 GB/T12237
Face-to-face dimension:ASME B16.10/DIN3202/GB/T12221
Flanged ends:ASME B16.5/DIN2501/GB/T9113.1
Butt-welding ends:ASME B16.25/
Socket welding ends:ASME B16.11/
Wall thickness: ASME B16.34/ EN12516
Fireproof:API607 9ISO10479
Inspection and test:API6D/API598 /EN12266/GB/T13927
Product range:1/2″~10″、DN15~DN250
Materials of main parts:WCB、CF8、CF8M、WC6、WC
Seat materials:PTFE 、RTFE or metal hard seal

Metal To Metal Seat Ball Valve

Design features:

Design of fireproof structure and obtaining the certificationISO5211 platform design is adopted for the convenuence of installing the actuator
Antistatic design between stem, body and ball
Anti-blow-out stem design
The pressure balancing hole is provided on the steel ball
The low platform products adopt packing gland type middle shaft
The double-layer stem packing and double butterfly spring structure of the high platform products play a self-compensation function for the middle shaft seal
The body is provided with a device for cleaning the valve cavity
According to the structural forms, the valves include one-piece type, two-piece type and three-piece type flanged ball valves, wafer flanged ball valves, and some butt-welding and socket welding ball valves

 

Product Details

1.Forged ball valve feature

TSV forged ball valve,the forging material can ensure sufficient rigidity and strength under maximum rated operation pressure without inherent flaw of cast. Enough wall thickness of separate body and adaptation of high strength tie bolts are convenient for valve maintenance and sufficient to bear the stress of pipe.The internal parts of valve are carefully designed and selected to ensure reliability under all kinds of work condition.

2.Anti-fire safe design

When the trunnion ball valve be used normally,its sealed by seat and ball surface,seat retainer sealed by O-ring and body,this is soft sealed and reliable sealing.When the seat and O-ring are burnt,the seat retainer and body will be sealed by expanded graphite.Thus act anti-fire safe purpose.

3.Anti-static device

In order to prevent friction among ball,stem and PTFE that generates static electricity which may light the combustibles and explosives that cause an accident,in this ball valve,static-conduction spring is set between the stem and the ball,the stem and the body.Thus static electricity is conducted to ground and system safety is secured.

4.Free leakage of body Sealed construction

The connective position of valve body and bonnet is double sealed by gasket and O-ring,on this base,such factors as fire,high temperature,shock and uneven opening or closing of the torque all can't induce external leakage.

5.Low torque in operation

The self-lubricated bearings are installed at the friction of stem,resulting in wear resistance,flexibility of operation and low torque.

6. Double block&bleed(DBB)

When ball is full open or close position,the transmitter substance in center cavity of body can be released by drainage and emptying devices.In addition,the over loaded pressure in the center cavity of valve can be released to low pressure end by self relief seat.

7.Emergency sealing

Compound injection holes are designed and compound injection valves are installed at locations of stem/cap and body support of side valve.When sealing of stem or seat is damaged to induce leakage,the compound can be used to do the second time sealing.A concealed check valve is installed in side of each compound injection valve to prevent compound from out flowing due to the action of transmitter substance.The top of the compound injection valve is the connector for fast connection with compound injection gun.

8.Extension stem

For the underground installed valve,the stem can be lengthened and for the convenience of operation the corresponding compound injection nozzle and drainage valve can be extended to the top of valve.

9.Automatic body cavity relief

When the body pressure going up un-normally as the unstable factor,the trunnion ball valve downstream seat will be pushed by unnormal pressure,and the release the un-normally pressure automatically,it doesn't damage to the sealing of upstream seat.

10.Various driving types

The top pad of valve designed according to ISO 5211,which is convenient for connection and exchange of various drivers.The common driving types are manual,electrical,pneumatic and pneumatic/hydraulic.  

 

KeyWords:

Seated Type Ball Valve ,Seated Trunnion Ball Valve ,Metal Sealing Ball Valve ,Seated Floating Ball Valve , Hard Seat Ball Valve , Soft Seated Ball Valve

 

If you have any enquiry about quotation or cooperation,please feel free to email us at or use the following enquiry form. Our sales will contact you within 24 hours. Thank you for your interest in our products.

We value your privacy

We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking "Accept All", you consent to our use of cookies.

Consent Preferences

Consent Preferences